Table of Contents
Advertisement
SAFETY
Precautions
The following are general safety precautions which personnel must understand and follow when using or servicing
this product. These precautions may or may not be included elsewhere in this manual.
CAUTIONS
1. Handpiece heaters and installed tips are hot when handpiece is powered on. DO NOT touch either the
heater or tip. Severe burns may result! Always store handpiece in the appropriate Tip & Tool Stand
when not in use.
2. Always use this system in a well ventilated area. A fume extraction system such as those available from
PACE are highly recommended to help protect personnel from solder flux fumes.
3. Exercise proper precautions when using materials (e.g., solder paste). Refer to the Material Safety Data
Sheet (MSDS) supplied with each chemical and adhere to all safety precautions recommended by the
manufacturer.
NOTES
Refer to the MBT 250, Service Manual (P/N 5050-0352) whenever service is required.
To insure continued peak performance, use genuine PACE replacement parts.
12
13
Advertisement
Table of Contents
