Used to store the current display setup. Saving a setup allows for quick loading of the same configurations for later use. This makes it easy to switch between
different applications or tasks. Up to 5 setups can be stored.
General
X
Used to view or edit the following system settings:
•
Auto Off Time
•
HART resistor On/Off
•
Serial Number
•
Firmware Version
•
Part Number
P1, P2, and APMi
X
•
Mode: Switch between absolute and gauge pressure
•
Filter Time
•
Zero Limit
•
Maximum Resolution: When a resolution less than standard is selected, the displayed number will include an asterisk (
•
Overpressure Count: Counts the times when pressure has exceeded 110% of the range