Contact Us; Warranty - Ametek Crystal HPC51 Operation Manual

Intrinsically safe handheld pressure calibrator

Hide thumbs

Table Of Contents

Table of Contents

CONTACT US

USA

Crystal Engineering • California

Tel +1 (800) 444 1850

Fax +1 (805) 595 5466

crystal@ametek.com

Mansfield & Green • Florida

Tel +1 (800) 527 9999

cal.info@ametek.com

ISO 17025 accredited calibration lab, (A2LA #2601.01).

If calling, have ready the model number, serial number, date of purchase, and reason for return. You will receive instructions for returning the device to us.

WARRANTY

Crystal Engineering Corporation warrants the HPC50 Series Calibrator to be free from defects in material and workmanship under normal use and service for

one (1) year from date of purchase to the original purchaser. It does not apply to batteries or when the product has been misused, altered or damaged by ac-

cident or abnormal conditions of operation.

Crystal Engineering will, at our option, repair or replace the defective device free of charge and the device will be returned, transportation prepaid. However, if

we determine the failure was caused by misuse, alteration, accident or abnormal condition of operation, you will be billed for the repair.

CRYSTAL ENGINEERING CORPORATION MAKES NO WARRANTY OTHER THAN THE LIMITED WARRANTY STATED ABOVE. ALL WARRANTIES, INCLUDING IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED TO A PERIOD OF ONE (1) YEAR FROM THE DATE OF PURCHASE.

CRYSTAL ENGINEERING SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT, TORT OR OTHERWISE.

Note:

(USA only) Some states do not allow limitations of implied warranties or the exclusion of incidental or consequential damages, so the above limita-

tions or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

United Kingdom

Germany

Tel +44 (0)1243 833 302

Tel +49 (0)2159 9136 510

stc.uk@ametek.com