Table of Contents
Advertisement
Overview
INTRODUCTION
Thank you for choosing the HPC50 Series intrinsically safe handheld pressure calibrator from Crystal Engineering Corporation. HPC50 calibrators feature dead-
weight tester accuracy in a modern digital package with the safest fitting connection available. The full color display features an easy to use interface and may
be used in a broad range of applications from simple tool type jobs to complex calibration jobs in custody transfer systems.
Accuracy is up to 0.035 percent of reading – so one HPC50 can typically replace several gauges or calibrators you may have been using. The HPC50 is fully
temperature compensated – so there is no change in accuracy throughout the entire operating temperature range!
Single and dual pressure sensor models are available from vacuum up to 10 000 psi / 700 bar. In addition, the HPC50 features the ability to add up to two
external pressure ports (APMi) to provide up to four pressure ports. When included with a barometric reference (BARO option), all pressure readings can be
displayed as gauge or absolute readings.
In addition to pressure measurement, the HPC50 also includes inputs for mA, voltage, switch testing, and up to two temperature measurement modules (ATMi).
HPC50 Series Measurement Options
Measurement Type
Available Modes (as defined on display)
Pressure
P1, P2, APMi1, APMi2, Diff. Pres, Dual Pres.
Temperature
ATMi1, ATMi2
Barometric Pressure
BARO
Current
mA in
Voltage
VDC In
Switch Test
Switch Test
Other features include:
•
User configurable information display
•
% error calculation
•
% flow calculation
•
Scaling
We hope your HPC50 meets your expectations, and we're interested in any comments or suggestions you may have. You can send us a note at:
crystal@ametek.com.
Many features in this and our other products are a direct result of your comments!
Crystal Engineering is the company that designs, manufactures, and services the nVision reference recorders, XP2i series pressure gauges, 30 series pressure
calibrators, and a variety of industry specific pressure measuring equipment.
•
Damping
•
Leak Testing
•
Min/Max hold
•
Uses Crystal's patented CPF fittings and hose system (leak-free and finger-tight to 10 000 psi (700 bar))
Overview
1
HPC50 Series Operation Manual
Advertisement
Table of Contents
