Configuration Manager - Planet WGS-4215-T User Manual

The page includes the following fields:
Object
• Save Configuration to
FLASH
• Restore to Default

4.1.2 Configuration Manager

The system file folder contains configuration settings. The screen in
The page includes the following fields:
Object
• Running Configuration
• Startup Configuration
Description
Click to save the configuration. For more detailed information, please refer to
chapter 4.1.2
Click to reset switch in default parameter. For more detailed information, please
refer to chapter 4.15.1
Figure 4-1-7 Save Button Screenshot
Description
Refers to the running configuration sequence use in the switch.
In switch, the running configuration file stores in the RAM. In the current version,
the running configuration sequence running-config can be saved from the RAM
to FLASH by saving "Source File = Running Configuration" to "Destination
File = Startup Configuration", so that the running configuration sequence
becomes the startup configuration file, which is called configuration save.
To prevent illicit file upload and easier configuration, switch mandates the name
of running configuration file to be running-config.
Refers to the configuration sequence used in switch startup.
Startup configuration file stores in nonvolatile storage, corresponding to the
so-called configuration save. If the device supports multi-config file, name the
configuration file to be .cfg file, the default is startup.cfg.
If the device does not support multi-config file, mandates the name of startup
61
User's Manual of WGS Managed Series
Figure 4-1-7 appears.