Dhcp Snooping Vlan Setting - Planet WGS-4215-T User Manual

The page includes the following fields:
Object
• DHCP Snooping
Buttons
: Click to apply changes.
The page includes the following fields:
Object
• DHCP Snooping

4.9.7.3 DHCP Snooping VLAN Setting

Command Usage
When DHCP snooping is enabled globally on the switch, and enabled on the specified VLAN, DHCP packet filtering will be

performed on any untrusted ports within the VLAN.
When the DHCP snooping is globally disabled, DHCP snooping can still be configured for specific VLANs, but the changes

will not take effect until DHCP snooping is globally re-enabled.
When DHCP snooping is globally enabled, and DHCP snooping is then disabled on a VLAN, all dynamic bindings learned for

this VLAN are removed from the binding table.
Description
Indicates the DHCP snooping mode operation. Possible modes are:
 Enabled: Enable DHCP snooping mode operation.
When enable DHCP snooping mode operation, the request
DHCP messages will be forwarded to trusted ports and only
allowed reply packets from trusted ports.
 Disabled: Disable DHCP snooping mode operation.
Figure 4-9-33 DHCP Snooping Information Page Screenshot
Description
Display the current DHCP snooping status
User's Manual of WGS Managed Series
251