Power Over Ethernet Powered Device - Planet WGS-4215-T User Manual

4.15.1 Power over Ethernet Powered Device

3~5 watts
6~12 watts
10~12 watts
3~12 watts
3~25 watts
30 watts
Since the WGS PoE Managed Switch Series per PoE port supports 48~56V DC PoE power output,
please check and assure the Powered Device's (PD) acceptable DC power range is 48~56V DC;
otherwise, it will damage the Powered Device (PD).
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices in the central area where UPS is
installed for un-interruptible power system and power control system.
Wireless LAN Access Points
Museums, sightseeing spots, airports, hotels, campuses, factories, and
warehouses can install the Access Point anywhere.
IP Surveillance
Enterprises, museums, campuses, hospitals and b anks can install IP
camera without the limit of the installation location. Electrician is not needed
to install AC sockets.
PoE Splitter
PoE Splitter splits the PoE 56V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and
reduces the installation time.
High Power PoE Splitter
High PoE Splitter splits the PoE 56V DC over the Ethernet cable into
24/12V DC power output. It frees the device deployment from restrictions
due to power outlet locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
High Power Speed Dome
This state-of-the-art design is considerable to fit in various network
environments like traffic centers, shopping malls, railway stations,
warehouses, airports, and production facilities for the most demanding
outdoor surveillance applications. Electrician is not needed to install AC
sockets.
340
User's Manual of WGS Managed Series