Table of Contents
Advertisement
•
If all frequencies in the search range you selected are locked out, All Locked! appears and the scanner does not search
the range.
•
If the service you select uses channels (such as CB Radio or Marine), the scanner displays the service channel number.
Quick Search
Quick Search lets you search from the currently-tuned frequency if you are scanning a conventional system or sets the system to ID
search if you are scanning a trunked system.
If you are on a conventional system or channel, press
/ No = "." appears. Press [HOLD/RESUME] to go to quick search hold.
Press [E/
] to start quick search or [.No] to go to the search menu.
YES
Custom Search
Custom Search lets you program and search 10 custom search ranges. You can search any of these ranges simultaneously and
select each custom search range you set. During custom search, the scanner searches starting with the lowest frequency in the
search range you select to the highest frequency in the range. There are two methods to begin a custom search.
Notes:
•
Search ranges are preset. These ranges can be edited. See "Editing a Custom Search Range" on Page XX to change the
range.
•
You cannot turn off all custom search ranges.
[MENU]
Search for ...
Custom Search ...
The other approach is:
◙
+ [SCAN/SEARCH]
(Func)
Quick Search? Yes=E" / No="."
Press [.No] then
to Custom Search
The scanner starts custom search of the custom search range you selected, stopping on any transmission it finds and displaying the
frequency. Turn the Scroll Control to change the search direction. An arrow appears, showing the current search direction.
To turn search ranges on or off, press [0] and [1] - [9]. To hold searching, press [HOLD/RESUME]. To resume searching, press
[HOLD/RESUME].
To lock out a frequency found while searching, press [L/O]. There are two different results based on the number of times you press
[L/O].
Press [L/O] 1 time: Temporary L/O appears
Press [L/O] 2 times: .Locked Out appears and the scanner resumes custom search.
If you turn off the active custom search range, the scanner skips to the next custom search range and continues searching.
Note: If all frequencies in all active custom search ranges are locked out, All Locked! appears and the scanner does not stop.
Editing a Custom Search Range
You can edit up to 10 custom search ranges. The names of the custom search ranges appear on the display. The default custom
search range names appear as Custom 1, Custom 2, and so on.
[MENU]
Search for ...
◙
Edit Custom
◙ +
◙
◙
◙
.
◙
[SCAN/SEARCH] to start quick search. Quick Search? Yes = "E"
48
Hide quick links:
Advertisement
Table of Contents
