Limit Search - Uniden HomePatrol?1 Owner's Manual

Tap Detail to switch to the detail view.
In this view, all hits are shown in chronological order.
Limit Search
A limit search provides a simple function to continuously
search between two frequencies. To access the Limit
Search feature, select Limit Search from the Discovery
Menu.
The Limit Search Menu appears.
Set Limit Frequencies – select to set the upper and lower
limit frequencies.
Modulation – tap to set the modulation method to use
for frequencies with activity. If set to Auto the defau
modulation mode for the band is used.
Step – tap to set the channel step to use. If set
the default channel step for the band is used.
Delay – tap to set how long the HomePatrol‐1 will pause
after a transmission ends before resuming the limit
search.
lt
to Auto,
Review Freq Avoids – tap to see the list
that have been avoided during limit search. This screen
also allows you to remove frequencies from the avoid list.
Tap Start to start the limit search.
To add a frequency to the avoid list, tap Avoid when the
HomePatrol‐1 stops on the frequency.
of frequencies
64 | P a g e