Screening Out Broadcast Sources; Finding Repeater Output Frequencies - Uniden Trunk Tracker IV BCD996T User Manual

This setting controls whether the scanner will search for a subaudible tone when it stops on a transmission during search or Close
Call operation.
On — The scanner searches for and displays any subaudible tone found.
Off — The scanner does not search for subaudible tones.
Note: This feature does not operate when the scanner is in AM/WFM/FMB modulation mode.

Screening Out Broadcast Sources

[MENU]
Srch/CloCall Opt
Broadcast Screen
This setting determines whether the scanner automatically ignores transmissions found during Custom Search, Quick Search, or
Close Call operation that are on common broadcasts, paging systems, and other annoyance radio sources.
Note: Broadcast screening does not work in All service search ranges.
Set All Band On — turns on broadcast screen on each band.
Set All Band Off — turns off broadcast screen on each band.
Set Each Band — lets you set broadcast screen only on specific bands you select. On or Off appears next to each option. Turn
the Scroll Control to select an option then press
Pager — the scanner skips known paging system frequencies.
FM — the scanner skips known FM frequencies.
UHF TV — the scanner skips known UHF TV frequencies.
VHF TV — the scanner skips known VHF TV frequencies.
NOAA WX — the scanner skips known NOAA weather frequencies.
Band 1-10 — select the custom band where you want to screen out broadcast sources.
Program Band — brings you to a menu setting to let you program a custom frequency range for broadcast screen. Turn the
Scroll Control to select an option then press
To set the custom range of a band, select one and press ◙ to set the limit.
Band 1-10 — select the group where you want to screen out broadcast sources.
Set Lower Limit— enter the lower limit of the frequency range,
◙
then press to set it.
Set Upper Limit — enter the upper limit of the frequency range,
◙
then press to set it.
To set the custom range of a band, select one and press

Finding Repeater Output Frequencies

◙
[MENU]
Srch/CloCall Opt
◙
Repeater Find
◙
On or Off
◙
◙
◙
to change the setting.
◙
to change the following setting.
◙
◙
to set the limit
55