Programming The Instant Priority Channel; Recalling The Instant Channel; Emg (Emergency Button); Call Function - Uniden UH6060 Owner's Manual

Operation

Programming the Instant Priority Channel

Press /
Channel you prefer. Press and hold [INST]
button on the microphone for 2 seconds to
store the new setting. P icon appears
for this channel.

Recalling the Instant Channel

Momentarily press the [INST] button on
the microphone at any time to return to
the Instant Channel. Press [INST] again to
return to the previous channel.

EMG (Emergency Button)

Press [EMG] to toggle between the current channel and the emergency
channels 05 and 35.
In EMG mode CH 05 and CH35 flash, and the EM icon displays.
When in EMG CH05 or EMG CH35 mode, the
[INST], [DCS/CTCSS] and [SCAN] buttons are disabled.
Press [EMG] again to exit EMG mode and return to the
NOTE
current channel.

Call Function

Press the microphone [CALL] Button. A three second ringing tone
will be transmitted.
You may select from 5 types of tones (see p.21).
Current regulations require calling tones to be restricted to
one transmission per minute. If a second transmission is
attempted within one minute then an error tone will sound.
NOTE
UNIDEN UH6060
to select the Priority
CALL
15
SQL INST
CALL EMG
MENU
DCS
SCAN
CTCSS
EMG
/
UHF CB Transceiver
INST
,