A Look At The Display; Turning On The Scanner And Setting The Squelch; Startup Key Operation - Uniden Trunk Tracker IV BCD996T User Manual

Tone-Out
Standby
11 Scan Hold
[SCAN/
Other than Scan
SEARCH]
or Scan Hold or
GPS
Search Hold
GPS
Scan
Search
Close Call Only
WX Scan
Scan
13 Scan
[MENU]
Scan Hold
GPS
Menu
All

A Look At The Display

[please use line art for the screen to show the icons and messages -
use as many screens as needed to cover all icons and text on the screen for
The display has indicators that show the scanner's current operating status. The display information helps you understand how your
scanner operates.
Operation

Turning On the Scanner and Setting the Squelch

To turn the scanner on, rotate [VOL] clockwise. Turn the knob to a comfortable sound level.
Rotate the squelch control [SQ] clockwise until you either hear a broadcast or noise just stops. The control is now set for strong
signals. If you desire to hear a weaker signal, turn it counter clockwise from that point until you hear background noise once more.

Startup Key Operation

You can setup a Startup Key Configuration so that when you power up, the scanner can change the lockout state for each system or
each site by pressing an assigned key. Navigate to Set Startup Key there are differences in the menu structure for Trunked and
Conventional systems.
Press Switches to Tone Out edit Menu to
change Tone Out Settings
Press Start Scanning
Press Instant switch to Scan Mode
[FUNC] + Toggle to resume searching
Press
Press Toggle to scanner LCD
Press Toggles HOLD on or off; In Close Call
mode, error tone sounds if no frequency
is detected.
[FUNC] + Press Toggle ID Search and ID Scan.
[FUNC] + Press Initiates edit menu for current system,
current search range, or current location
data
Press Back up one level in the menu.
Press Use with Scroll Control to select menu
settings
different situations]
18