Turning On The Scanner; A Look At The Display - Uniden UBC125XLT Owner's Manual

TURNING ON THE SCANNER

Note: Make sure the scanner's antenna is connected before you
turn it on.
1. You can select the band plan (Band Plan 1 or 2) when you
turn on the scanner. When you press and hold
second to turn on the scanner, also press and hold 1 for
Band Plan 1 or 2 for Band Plan 2.
2. If the scanner is new or has been reset, the default mode is
Scan Hold with all banks enabled and Close Call Do-
Not-Disturb active. Otherwise, the scanner displays the last
mode the scanner was in before it was powered down.

A LOOK AT THE DISPLAY

The display has indicators that show the scanner's current
operating status. The display information helps you understand
how your scanner operates.
Note: Not all of these icons may appear at the same time.
15 14
H O L D T L / O
F
1 C h a n n e l N a m e
2
C H 0 0 0 1
3
FM
P
4
B N K 1 2 3 4 5 6 7 8 9 0 C
5
13 12 11
1 6 2. 5 2 5 0
PRI+ C 2 5 4 . 1
6 7
for 1
10
9
8
27