Table of Contents
Advertisement
Operation
(continued)
Adjusting the Focusing Tension (Fig. 8)
If the feel is very heavy when focusing with the focusing knobs
②③, or the specimen leaves the focus plane after focusing,
or the stage lowers by itself, adjust the tension with the tension
adjustment ring ①.
Turn the tension adjustment ring clockwise to loosen or
counterclockwise to tighten according to user preference.
(Fig. 8).
Using the Stage Plates (Optional) (Fig. 9 & 10)
NOTE: for optimal viewing, ensure the thickness marked on
each objective (0.17mm or 1.2mm) is the same as the
container, dish or slide.
With the mechanical stage ②, a user can use any of the
optional stage plates for flasks, well plates, culture dishes or
slides. The appropriate stage is inserted into the slide holder
and can be moved by turning the X③ and Y ④ stage
movement controls.
®
ACCU-SCOPE
EXI-310 INVERTED MICROSCOPE SERIES
Fig. 8
①
Fig. 9
②
Fig. 10
③
④
11
Advertisement
Table of Contents
