Table of Contents
Advertisement
Using Fluorescence
If you purchased your EXI-310 with fluorescence, your complete fluorescence system is pre-installed, aligned
and tested by our trained technicians to your specifications prior to shipment.
The complete fluorescence illumination light path includes:
Field iris diaphragm
Dovetail filter slider
4 position filter holder: 3 for filter sets and 1 open position for brightfield or phase contrast observation
Dust caps for slider and push rod for filter position and selection
Each position of the slider clicks securely into position due to click stop ball-bearing positioning.
Alternate light sources are available for metal halide systems, LED spectral illumination, or mercury lamp
housing and power supply.
Various filter sets are also available for installation. Contact your authorized ACCU-SCOPE dealer, or call us
at 631-864-1000 for a list of available filter sets and illumination options.
Fluorescence
Components Diagram
Fluorescence
Filter Block
®
ACCU-SCOPE
EXI-310 INVERTED MICROSCOPE SERIES
Light Shield
Field Iris Diaphragm
Centering Screws
(one on each side)
Filter Slider Knob
Field Iris Diaphragm
Lever
Fluorescence
Connector for
Illuminator
16
Advertisement
Table of Contents
