Powering On; Illumination; Specimen Slide; Stage - Accu-Scope EXC-400 Manual

Hide thumbs Also See for EXC-400:

Table of Contents

ADJUSTMENT & OPERATION

①

Fig. 12

①

Fig. 13

①

Fig. 14

ACCU-SCOPE

②

③

④

73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com

EXC-400 MICROSCOPE SERIES

Powering On - (Fig. 12)

With the microscope plugged in, locate and push the I/O

toggle button ① on the back of the microscope to the

ON (I) position.

Adjusting Brightness - (Fig. 13)

Adjust the Light Adjustment Knob ① until the

illumination is comfortable for observation. Rotate the

light adjustment knob clockwise (towards the back of the

microscope to increase the brightness. Rotate the light

adjustment knob ① counterclockwise (towards the front

of the microscope) to decrease the brightness.

Placing a Specimen - (Fig. 14)

Push the left side of the Specimen Holder ① on the top

of the stage plate to open the holder.

Place your slide ② in and slowly release the holder to

allow it to close firmly against the slide.

Adjusting the Stage - (Fig. 14)

The stage has a coaxial X-Y Stage Movement Knob

which allows you to move your specimen in any

direction:

Top Knob ③: (Y) forward/backward movement

Bottom Knob ④: (X) left/right movement

Table of Contents