Connecting The Power Cord; Illumination - Accu-Scope EXM-150-MS Manual

ADJUSTMENT & OPERATION
①
②
①
®
ACCU-SCOPE
EXM-150 MICROSCOPE SERIES

Connecting the Power Cord

Make sure the power switch is at "0"(OFF) before connecting.
Insert the connector ① of power cord securely into the power
socket ②.
Insert the other connector securely into an electrical outlet.
The microscope uses a universal power supply so it may
be used in any voltage range between 90 ~ 240v when
used with the appropriate line cord.
IMPORTANT: Use care when storing the power cord so
that it does not bend or twist – it is recommended to wrap
the cord around the cord hanger for storage.

Illumination

With the microscope turned on (I), rotate the light adjustment
dial ① until the illumination is comfortable for observation.
Rotate the light adjustment knob toward the back of the
microscope to increase brightness; rotate toward the front to
reduce brightness.
6