Changing The Magnification; Adjusting Illumination - Accu-Scope EXS-210-24 Manual

ADJUSTMENT & OPERATION
①
②
Fig. 5
②
Fig. 6
®
ACCU-SCOPE
Changing the Magnification (Fig. 5)
Using the finger grips at the top of the turret ①, rotate the
objective turret until it clicks into place. The magnification of the
objective in the field of view is indicated by the number ② on
the front of the objective turret (facing forward).
Additional magnification ranges can be obtained through the
use of optional 5x, 15x, or 20x eyepieces.
Total Magnification = Magnification of microscope body x
magnification of eyepiece
(i.e., 3x X 10=30x)
Adjusting Illumination (Fig. 6)
The EXS-210 is equipped with a rechargeable variable, built-in
3-way illumination system: LEDs for incident (top) and
transmitted (bottom).
Brightness adjustment: the right brightness adjustment dial ①
is used to adjust the bottom illumination, and the left brightness
adjustment dial ② is used to adjust the top illumination.
Turn the dials to adjust the brightness as needed.
Each dial also has its own on/off so you can use either top
①
illuminator or bottom illuminator, or both illuminators
simultaneously.
For more information about the rechargeable LED illumination
system and replacing the rechargeable batteries, please refer to
pages 8-9.
EXS-210 STEREO MICROSCOPE
(continued)
7