An annual schedule of preventative maintenance by qualified personnel is highly recommended. Your ® authorized ACCU-SCOPE distributor can arrange for this service. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts or touching glass surfaces. ③ Eyepieces ② Objectives ① ⑤ Condenser Power Cord ④ Light Source ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Page 9
ASSEMBLY DIAGRAM EXC-350-470 Fluorescence Microscope Binocular Head ⑥ Eyepieces ③ ⑨ ① ② LED Fluorescence Illuminator Light Shield Power Cord ④ Objective ⑧ ⑤ Condenser ⑦ Light Source ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Page 10
Remove the eyepiece caps ② ③ Insert the eyepiece into the eyepiece tube until it touches the surface of the eyepiece tube Repeat above for the other eyepiece (see Fig. 3). ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Page 11
An optional cord hanger can be installed on your microscope for simple and easy Photo 2 storage. (see Photos 1 & 2) Optional Cord Hanger Shown With Cord ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Repeat several times to check. NOTE: do not counter rotate the focusing knob as this will cause severe problems and damage to the ③ ① focusing system. (Fig. 8) Fig. 8 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Remember your interpupillary for future operation. NOTE: The eyepiece tubes can be rotated 180° to increase the eyepoint height by 34mm to accommodate the needs of different users. (Fig. 12) Fig. 12 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
For optimal viewing conditions set the condenser aperture diaphragm lever to match the Fig. 16 magnification of the objective in the optical path (Fig. 16). ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
A filter is used to make the background color more suitable for the application and as a method to increase the contrast. (Fig. 18) Filters are available in clear blue, frosted blue, green, yellow and white. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Look at the camera image and adjust the focus of the camera image via the rotating ring ③ until it matches the focus as seen through the eyepieces. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Rotation of the polarizer ④ will change the orthogonal status of polarization. NOTE: When the image is darkest as you viewed ③ ④ through the eyepieces, polarization has been achieved. Fig. 21 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
① insert the one end of the transformer into the LED ② fluorescence illuminator socket . Insert the other end into an electrical outlet. (Fig. 24) Fig. 24 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Page 19
When the LED fluorescence filter block adjustment knob is turned to BRIGHTFIELD, the indicator light on the front of the illuminator unit is OFF and brightfield observation is possible. ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Air bubbles in immersion oil Remove bubbles Condenser aperture is closed Open or close properly or open too much Condenser is positioned too Position the condenser slightly lower than the upper limit ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Page 21
Cover glass is to thick Use a 0.17mm cover glass Diopter adjustment is not set Readjust the diopter settings properly as outlined in section 4.3 ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
Page 22
Increase the tension on the the coarse focusing knob focusing knobs Fine focus is ineffective Tension adjustment is set too Loosen the tension on the high focusing knobs ® ACCU-SCOPE 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com...
SCOPE at (631) 864-1000. This warranty is limited to the continental United States of America. All items returned for warranty repair must be sent freight prepaid and insured to ACCU-SCOPE INC., 73 Mall Drive, Commack, NY 11725 – USA. All warranty repairs will be returned freight prepaid to any destination within the continental United States of America, for all foreign warranty repairs return freight charges are the responsibility of the individual/company who returned the merchandise for repair.