Auxiliary Input & Output; Door Alarms - Rosslare AYC-Q4 Series Manual

Changing from Normal Mode to Bypass Mode
See Changing the Normal / Bypass Code and Door Chime
Settings on page 38 to create/modify the Normal / Bypass code.
1) Enter the 4 digit Normal /
Bypass code
• Mode LED will flash
Orange
2) Press the "#" key to
confirm the mode change.
• Mode LED will turn orange
Changing from Bypass Mode to Normal Mode
See Changing the Normal / Bypass Code and Door Chime
Settings on page 38 to c
1) Enter the 4 digit Normal /
Bypass co
• Mode LED will flash
green
2) Press the "#" key to
confirm th
• Mode LED will turn green
6.3 Auxiliary Input & Out
For optimum usability in different applications
auxiliary input and output can be confi
modes of operation.
6.4 Door Alarm
Door alarms can be gen
to a Door Position Switch.
conditions are supported, as well as, a configurable delay timer
for each alarm type. Only one Door-alarm is enabled at an
Page 31
reate/modify the Normal / Bypass code.
de
e mode change.
s
erated by connecting the Auxiliary Input
Either Door-Forced or Door-Ajar
Mode/Transmit
Green
Mode/Transmit
Orange
Mode/Transmit
Orange
Mode/Transmit
Orange
Mode/Transmit
Green
Mode/Transmit
Green
put
, the controller's
gured in ten different
AYC-Qx4
Door/Program
Door/Program
Door/Program
Door/Program
Door/Program
Door/Program
y one
manual
family