www.ti.com
2 System Setup
2.1 Software Setup
This section provides the procedure for EVM software installation.
2.1.1 Operating Systems
The EVM software is compatible with the Windows
though EVM software is compatible with Linux and MAC operating systems, EVM is tested with Windows
operating system only.
2.1.2 Software Installation
The software is available on the device product folder, and can also be found in the
Search for DAC53204EVM in the GUI Composer Gallery. Use the down arrow symbol to download the software.
There are two downloads: DAC53204EVM GUI and GUI Composer Runtime. Either download both, or just
download the EVM GUI; the run-time file can be downloaded through the EVM GUI during installation. The
software can also be run online by clicking; however, only after the firmware and driver are upgraded. After
the software is downloaded to the PC, navigate to the download folder, and run the DAC53204EVM software
executable, as shown in
Figure
When the DAC53204EVM software is launched, an installation dialog window opens and prompts the user to
select an installation directory. If left unchanged, the software location defaults to C:\Program Files (x86)\Texas
Instruments\DAC53204EVM as shown in
Runtime application, the installer also requests for an automatic download from the web. Select either Install
from Web to download and install from the web, or Install from PC and provide the path to the local file that is
already downloaded. The run-time file also installs the USB drivers, unless the drivers are already installed. The
software installation automatically copies the required files and drivers to the local machine.
SLAU851 – MARCH 2021
Submit Document Feedback
™
10, MAC and Linux operating systems. Please note even
2-1.
Figure 2-1. DAC53204EVM Software Setup
Figure
2-2. If there is no previous installation of the GUI Composer
Figure 2-2. Software Installation Path
Copyright © 2021 Texas Instruments Incorporated
System Setup
™
10
GUI Composer
Gallery.
DAC53204EVM User's Guide
5