Switching The Gain - Ikegami HDK-97C Operation Manual

Switching the GAIN

When shooting the camera under the conditions such as in evening, night time, or indoor use, the gain (sensitivity) of the camera
needs to be adjusted to suit the brightness of the subject. The gain can be adjusted on the camera or from the remote controller.
Adjusting the Gain on the Camera
■
1
Use the GAIN SELECT switch on the right side of the camera to switch the setting according to the shooting
conditions.
Note:
Allocate gain values to the GAIN SELECT switch in advance. Refer to "5.2 Settings from the Menu", "Menu Configuration
and content" (page 85) for how to allocate gain values.
■ Adjusting the Gain from the Remote Controller
Note:
When a remote controller is connected, the operation of the remote controller has priority over the operation switches on the camera (when
SEMI REMOTE MODE is set to "OFF").
Reference:
For details on how to operate the various remote controllers, refer to the instruction manuals attached to the remote controllers.
1
Use the GAIN (dB) on the remote controller to switch the setting according to the conditions.
5.1 Settings Using Switches on the Camera
Camera right view
(Switch control panel)
GAIN SELECT switch
HDK-97C 1303 VER1 (U)
5
79