Power Supply From Ccu - Ikegami HDK-97C Operation Manual

3.3 Power Connection

Power Supply from CCU

Explains how to supply power from the CCU-970.
AC INPUT connector
CCU-970 rear view
AC cable
1
Make sure the CCU-970 MAIN POWER switch is OFF.
2
Connect the AC cable to the AC INPUT connector on the rear of CCU-970.
3
Insert the AC plug into the power outlet.
4
Connect the CCU-970 and the camera via a fiber cable.
This completes the procedure for connecting power from the CCU-970 to the camera.
There are two methods of supplying power to the camera in this state:
- When operating the camera power source from the CCU.
- When operating the camera power source from OCP (remote control).
48
Fiber cable
To the camera
Power outlet
HDK-97C 1303 VER1 (U)