Temp!!" Or "Fan!!" Appears On The Vf Screen - Ikegami HDK-97C Operation Manual

6.2 "TEMP!!" or "FAN!!" Appears on the VF Screen

6.2 "TEMP!!" or "FAN!!" Appear on the VF Screen
When the temperature inside the camera increases abnormally, a warning indicating an abnormal temperature rise flashes on the
viewfinder screen.
Statu
The camera is exposed to direct sunlight for many
hours.
TEMP!! flashing
The camera is used near some heating appliance.
If a fan stops due to some failure, a warning indicating an irregular fan stop flashes on the viewfinder screen.
Statu
FAN!! flashing Fan stops.
Note:
To prevent temperature increase inside the camera, cooling fans are provided at the top of the camera and fiber adaptor.
For how to check which fan stops, refer to "5. CAMERA SETTINGS and ADJUSTMENT", "Menu Configuration and content" (page
85).
106
ＴＥＭＰ!!
Cau e
ＦＡＮ!!
Cau e
HDK-97C 1303 VER1 (U)
Action
Put a sunshade cover on the camera to avoid direct
sunlight.
Move the position of the camera or heating appliance.
Action
Inspect the fan for any problem.