4.1 Operating Procedure
This chapter explains how to operate the HDK-97C camera.
■
Initial Operation Check
――――――――――――――
When you use the camera for the first time after purchase, ensure that it works properly.
Switch Position Check
◆
Turning ON Power
◆
◆
Output Signal Check
- Color-Bar Signal Check
- Test Pulse Check (CAL Signal)
- Check by Use of External Chart
■
Preparation Before Shooting
―――――――――――――――――
Studio Operation
◆Viewfinder Adjustment ・ ・ ・ ・ ・ ・ (page 62)
- Diopter Adjustment and Screen Adjustment
- Display Mode Check
◆Output Signal Check ・ ・ ・ ・ ・ ・ ・ (page 63)
- Color-Bar Signal Check
- Test Check (CAL Signal)
- Check by Use of External Chart
◆Auto Setup ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ (page 65)
<Pattern 1>
1
LEVEL Auto Setup
2
Black Shading
<Pattern 2>
1
Auto Black Balance (ABB)
2
Auto White Balance (AWB)
<Pattern 3>
1
Black Shading
2
Auto White Balance (AWB)
(Execute one of the above patterns.)
■
Shooting Setting and Adju tment
――――――――――――――――――――
Make IRIS and pedestal adjustments and various function settings according to the environment in which the
camera is used.
◆
Camera menu settings
Refer to "5. CAMERA SETTINGS and ADJUSTMENT" (page 73).
CCU menu settings
◆
Refer to the operation manual accompanying CCU-970 to be used.
・・・・・(page 58)
・・・・・・・(page 60)
・・・・・・(page 63)
HDK-97C 1303 VER1 (U)
4.1 Operating Procedures
Stand-alone/VTR Location Operation
◆Shooting in a Particular Environment
◆Viewfinder Adjustment ・ ・ ・ ・ ・ ・ (page 62)
- Diopter Adjustment and Screen Adjustment
- Display Mode Check
◆Output Signal Check ・ ・ ・ ・ ・ ・ ・ (page 63)
- Color Bar Signal Check
- Test Check (CAL Signal)
- Check by Use of External Chart
◆Auto Setup ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ (page 65)
<Pattern 1>
1
QUICK Auto Setup
2
Auto White Balance (AWB)
<Pattern 2>
1
Auto Black Balance (ABB)
2
Auto White Balance (AWB)
<Pattern 3>
1
Black Shading
2
Auto White Balance (AWB)
(Execute one of the above patterns.)
4
57