Enhancing The Vertical Resolution (Super-V Function) - Ikegami HDK-97C Operation Manual

5.1 Settings Using Switches on the Camera
Enhancing the Vertical Re olution (Super-V Function)
Super-V function enhances the vertical resolution. It is activated from the camera, MCP, or OCP-200.
Note:
- The sensitivity of the camera decreases when in the Super-V function mode.
- When a remote controller is connected, the operation of the remote controller has priority over the operation switches on the camera.
Camera front view
1
Select "1" or "2" from MENU (1/3) "VF DISPLAY" - "DISPLAY MODE."
Characters appear in the viewfinder.
Reference:
Refer to "5.2 Settings from the Menu", "Menu Configuration and content" (page 85) for details.
2
Set the SHUTT/SUP-V switch on the right side of the camera to SET.
One of the following modes is displayed:
- Preset shutter speed
- Variable shutter speed
- SUPER-V
Note:
Each time the SHUTT/SUP-V switch is pressed to the SET position, the mode switches in the order of preset shutter, variable
shutter and SUPER-V.
3
Select "SUPER-V."
Note:
The flashing stops automatically in approximately 3 seconds after the setting operation ends.
4
Press the SET button.
To Cancel the Super-V Function
■
1
Set the SHUTT/SUP-V switch to OFF.
78
ON
OFF
SEL
VF
CHAR
P.FUNC
PUSH
SET
MENU
MIC
Rotary pulse switch
HDK-97C 1303 VER1 (U)
Camera right view
(Switch control panel)
SHUTT/SUP-V switch