Operating Systems - Ikegami HDK-97C Operation Manual

1.2 Operating Systems

1.2 Operating Sy tem
This product is equipped with functions which interface with a control panel and a control
unit. If you use CCU-970, this product can support not only stand-alone VTR shooting but
also various shooting styles such as studio shooting and field shooting as a system camera.
Furthermore, you can choose and operate each control panel to be connected to the CCU,
for your purpose.
■ Example of Minimum Configuration of System Camera (1 camera, 1 OCP, 1 MCP)
Camera Head
CCU
Example of System Camera Configuration (Up to 8 cameras, 1 MCP)
■
Camera Head
CCU-1
COMM
CCU-8
6
PM
PM
PM
WFM
WFM
WFM
WFM CONT
COMM
OCP
PM WFM
WFM
PM
CONT
WFM
PM
CCU-1
WFM, COMM
CCU-8
PM, WFM, COMM
HDK-97C 1303 VER1 (U)
Note:
Note:
OCP
DC 12V
EXTERNAL
MCP
POWER
Term:
AC
PM WFM
Term:
OUT
CSU
IN
MCP
Term:
By using an SE-H700 system
expander together, this product
can operate as a full-scale studio
camera equipped with a 9-inch
viewfinder and a full studio lens.
For Minimum operating System,
no MCP needed when OCP-200
is used.
When any MCP other than
MCP-200 is used, EXTERNAL
POWER is not necessary, and the
CP cable length is 300m at the
maximum.
OCP (Operation Control
Panel)
This control panel is used for
normal operation. Typically one
OCP is dedicated to one camera
chain.
MCP (Maintenance Control
Panel)
This control panel is used for
the maintenance and precise
adjustment of the camera in
studio shooting. By using a
memory card, you can save the
shooting condition on memory
and make setup easily. By using a
CSU together with an MCP, you
can maintain up to 32 cameras.
CSU (Camera Select Unit)
Used when controlling multiple
cameras. With using a MCP,
one CSU can control up to 8
cameras, and contains terminals
through which video is output
on the monitor from the selected
camera.