Introduction - IEI Technology KINO-CV-D25501 User Manual

KINO-CV-D25501/N26001 SBC
C.1 Introduction
The DIO connector on the KINO-CV-D25501/N26001 is interfaced to GPIO ports on the
Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital
inputs and digital outputs are generally control signals that control the on/off circuit of
external devices or TTL devices. Data can be read or written to the selected address to
enable the DIO functions.
NOTE:
For further information, please refer to the datasheet for the Super I/O
chipset.
The BIOS interrupt call INT 15H controls the digital I/O.
INT 15H:
AH – 6FH
Sub-function:
AL – 8
AL
:Set the digital port as INPUT
:Digital I/O input value
Page 103