Table of Contents
Advertisement
COVER(S), CYLINDER HEAD, RIGHT
Removal
REMOVAL
Fig. 87: CYLINDER HEAD COVER GASKET
Courtesy of CHRYSLER LLC
1 - CYLINDER HEAD COVER
2 - BOLT
3 - SEAL (SERVICED WITH BOLT)
4 - GASKET
1. Disconnect negative cable from battery.
2. Disconnect spark plug wires from plugs.
3. Disconnect CCV hose from cylinder head cover.
4. Remove cylinder head cover bolts.
5. Remove cylinder head cover (1) and gasket (4).
Installation
INSTALLATION
viernes, 1 de octubre de 2021 05:18:30 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 66
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
