Table of Contents
Advertisement
Fig. 68: Hose Assembly & IAT Sensor
Courtesy of CHRYSLER LLC
1. Install air cleaner housing into vehicle and onto the locating pin.
2. Install bolt to hold air cleaner housing to the upper radiator cross member.
3. Install the air inlet tube to the throttle body and tighten clamp.
4. Connect the IAT sensor (2).
5. Connect the CCV hose to the air cleaner cover.
6. Connect the negative battery cable.
CYLINDER HEAD
DESCRIPTION
DESCRIPTION
viernes, 1 de octubre de 2021 05:18:30 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 52
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
