Parts Required; Tools Required - Jeep Wrangler Sport 2010 Manual

Fig. 209: Manifold Port (Nipple) Repair
Courtesy of CHRYSLER LLC
1 - BRAKE BOOSTER PORT = 1/4"-18 NPT PIPE TAP
1 - LDP/SPEED CONTROL PORT = 1/8"-18 NPT PIPE TAP
2 - DRILL BIT = 7/16" BRAKE BOOSTER PORT
2 - DRILL BIT = 11/32" LDP/SPEED CONTROL PORT
3 - INTAKE MANIFOLD
NOTE: While performing this procedure, avoid getting the manifold material residue
into the plenum chamber.
The composite intake manifold vacuum ports can be repaired. Although, if the manifold plenum chamber is
damaged or cracked, the manifold must be replaced.
To repair a broken or damaged vacuum port on the composite intake manifold, perform the following
procedure:

PARTS REQUIRED

Brass Port - 1/4" O.D. x 1/8" pipe thread
(LDP/Speed Control Port)
Brass Port - 1/2" O.D. x 1/4" pipe thread (Brake
Booster Port)
viernes, 1 de octubre de 2021 05:18:32 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Pipe Tap - 1/8" - 18 NPT
Drill Bit - 11/32"
File/Sandpaper
Pipe Tap - 1/4" - 18 NPT
Drill Bit - 7/16"
File/Sandpaper
Page 172

TOOLS REQUIRED

© 2011 Mitchell Repair Information Company, LLC.