Table of Contents
Advertisement
Fig. 149: LIFTER LUBRICATION HOLE
Courtesy of CHRYSLER LLC
1. Lubricate the lifters with engine oil.
NOTE:
Position the lifter in bore with the lubrication hole facing upward.
2. Install the hydraulic lifters with the lubrication hole facing upward towards middle of block. Install lifters
in original positions, if reused.
viernes, 1 de octubre de 2021 05:18:31 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 120
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
