Jeep Wrangler Sport 2010 Manual page 171

4. Repair as required.
Standard Procedure
MANIFOLD STRIPPED THREAD REPAIR
The composite upper intake manifold thread bosses, if stripped out, can be repaired by utilizing a repair screw
available through Mopar® parts. Repair screws are available for the following manifold attached components:
MAP sensor
Power steering reservoir
EGR tube
Throttle cable bracket
The repair screws require a unique tightening torque specification from the original screw. Refer to the
following chart for specification.
DESCRIPTION
MAP Sensor Repair Screw
Power Steering Reservoir Repair Screw
EGR Tube Attaching Repair Screw
Throttle Cable Bracket Repair Screw
INTAKE MANIFOLD VACUUM PORT REPAIR
viernes, 1 de octubre de 2021 05:18:32 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
STRIP-OUT REPAIR SCREWS ONLY
4 N.m (35 in. lbs.)
9 N.m (80 in. lbs.)
9 N.m (80 in. lbs.)
9 N.m (80 in. lbs.)
*Install Slowly Using Hand Tools Only
Page 171
TORQUE*
© 2011 Mitchell Repair Information Company, LLC.