Table of Contents
Advertisement
6. Remove cylinder head cover and gasket.
Installation
INSTALLATION
Fig. 84: PCV VALVE LOCATION 3.8L
Courtesy of CHRYSLER LLC
1. Clean cylinder head and cylinder head cover mating surfaces. Inspect cylinder head cover surface for
flatness. Replace gasket as necessary.
2. Assemble gasket to cylinder cover by inserting the fasteners through each bolt hole on cover and gasket.
3. Install the cylinder head cover and bolts.
4. Tighten cylinder head cover bolts to 12 N.m (105 in. lbs.).
5. Connect PCV hose (1).
viernes, 1 de octubre de 2021 05:18:30 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 64
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
