Table of Contents
Advertisement
Fig. 33: MAP SENSOR 3.8L
Courtesy of CHRYSLER LLC
20. Route the engine harness to the left cylinder head and attach the purge solenoid.
21. Connect the throttle position (TP), idle air control (IAC) motor, oxygen (H02), cam position (CMP),
manifold absolute pressure (MAP) (2), and the engine wiring harness connectors.
Fig. 34: Remove/Install Discharge Line
Courtesy of CHRYSLER LLC
22. Connect the A/C discharge line (2) at the compressor. Refer to Heating and Air
Conditioning/Plumbing/COMPRESSOR, A/C - Installation .
Fig. 35: Suction Line to Compressor
viernes, 1 de octubre de 2021 05:18:29 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 31
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
