Table of Contents
Advertisement
Fig. 164: PISTON AND CONNECTING ROD
Courtesy of CHRYSLER LLC
1 - "F" TOWARD FRONT OF ENGINE
2 - RING COMPRESSOR
3 - SPECIAL TOOL 8189
4 - OIL SQUIRT HOLE
2. Lubricate the piston (1) and rings with clean engine oil. Position a ring compressor (2) over the piston and
rings, and tighten the compressor (2). Be sure position of rings does not change during this operation.
3. Position upper bearing onto connecting rod. Lubricate bearing with oil.
4. Install Guide Pins 8189 (3) on the connecting rod.
viernes, 1 de octubre de 2021 05:18:31 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 133
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
