Jeep Wrangler Sport 2010 Manual page 179

8. Connect the power brake booster hose (1) at the rear of the intake manifold (2).
Fig. 220: MAP SENSOR 3.8L
Courtesy of CHRYSLER LLC
9. If removed, install the MAP sensor (1) at the rear of the intake manifold (3) by pushing down on the
MAP sensor while rotating clockwise about 1/4 turn.
10. Connect the MAP sensor electrical connector (2).
Fig. 221: EGR TUBE FLANGE
viernes, 1 de octubre de 2021 05:18:32 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 179 © 2011 Mitchell Repair Information Company, LLC.