Table of Contents
Advertisement
Fig. 65: Hose Assembly & IAT Sensor
Courtesy of CHRYSLER LLC
1. Disconnect the IAT sensor (2).
2. Disconnect the CCV hose.
3. Separate the air inlet tube from the throttle body.
4. Remove the air cleaner cover bolts.
5. Lift cover and pull toward the engine and remove cover tabs from air cleaner housing.
6. Lift cover and remove the filter.
Installation
INSTALLATION
viernes, 1 de octubre de 2021 05:18:30 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 49
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
