Table of Contents
Advertisement
Fig. 67: Hose Assembly & IAT Sensor
Courtesy of CHRYSLER LLC
1. Disconnect the negative battery cable.
2. Disconnect the inlet air temperature sensor (2).
3. Disconnect the CCV hose from the air cleaner cover.
4. Remove the air inlet tube to throttle body.
5. Remove the bolt for air cleaner housing at upper radiator cross member.
6. Pull air box up and off over the single locating pin.
7. Remove air box from vehicle.
Installation
INSTALLATION
viernes, 1 de octubre de 2021 05:18:30 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 51
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
