Table of Contents
Advertisement
Fig. 66: Hose Assembly & IAT Sensor
Courtesy of CHRYSLER LLC
1. Install the air filter element into air box.
2. Move cover so that the tabs insert into the air cleaner housing.
3. Position the cover down over the element and lower housing and tighten the fasteners.
4. Connect the air inlet tube to the throttle body and tighten the clamp.
5. Connect the IAT sensor (2).
6. Connect the CCV hose.
BODY, AIR CLEANER
Removal
REMOVAL
viernes, 1 de octubre de 2021 05:18:30 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 50
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
