Table of Contents
Advertisement
5. Install the timing cover.
NOTE:
Tighten the M10 bolts (2, 4, 6,) first, then the M8 (1, 3, 5, 7).
6. Install timing chain cover bolts. Tighten the M10 bolts (2, 4, 6) to 54 N.m (40 ft. lbs.) and the M8 bolts
(1, 3, 5, 7) to 28 N.m (21 ft. lbs.).
Fig. 255: Upper Oil Pan-To-Engine Block Bolts
Courtesy of CHRYSLER LLC
7. Raise and support the vehicle on a hoist. Refer to Vehicle Quick Reference/Hoisting - Standard
Procedure .
8. Install the oil pan and structural cover. See Engine/Lubrication/PAN, Oil - Installation.
viernes, 1 de octubre de 2021 05:18:33 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
severe damage may result.
Page 204
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
