Table of Contents
Advertisement
12. Clean and inspect the upper intake manifold.
Cleaning
CLEANING
1. Discard gasket(s).
2. Clean all sealing surfaces.
Inspection
INSPECTION
Check manifold for:
Damage and cracks.
Mounting surface distortion by using a straightedge and thickness gauge.
Installation
UPPER INTAKE MANIFOLD
Fig. 217: INTAKE TORQUE SEQUENCE 3.8L
Courtesy of CHRYSLER LLC
1. Clean the gasket surfaces and remove the covering from the lower intake manifold ports.
2. Inspect the intake manifold gasket condition (gaskets can be reused if not damaged).
3. Position the intake manifold gaskets into the seal channels and press lightly into place.
viernes, 1 de octubre de 2021 05:18:32 p. m.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
Page 177
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
