LEGRAND KEOR HPE 60 kVA Operating Manual page 1040

3.2 HANDLING OF THE UPS
The UPS is packed on a pallet. It is handled from the transport vehicle to the installation (or storage)
place via a fork lift.
The device has a heavy weight
 Avoid turnover during the transport of the UPS.
 Cabinets must always be handled in upright position.
 During loading and unloading operations, always respect the indications regarding the
device barycentre marked on the package.
Before positioning the UPS, in order to avoid risks of turnover, it's recommended to move the system on
the wood pallet on which the UPS is fixed. Before the positioning in the final location, remove the UPS
from the pallet.
Once downloaded from the pallet, the UPS cannot be handled with forklift from front or rear face, only
from lateral face to assure stability, as shown by the following picture.
Picture 2 – Handling of the KEOR HPE UPS 60÷80 kVA
24 OMW07096 REV. E
Installation and start-up of KEOR HPE UPS 60÷80 kVA
Installation et démarrage de l'ASI KEOR HPE 60÷80 kVA
Installazione e avviamento KEOR HPE UPS 60÷80 kVA