LEGRAND KEOR HPE 60 kVA Operating Manual page 1039

Installation and start-up of KEOR HPE UPS 60÷80 kVA
Installation et démarrage de l'ASI KEOR HPE 60÷80 kVA
Installazione e avviamento KEOR HPE UPS 60÷80 kVA
3 INSTALLATION
3.1 RECEIPT OF THE UPS
Please inspect the device before installing it. In case any damage is noticed from the conditions of the
package and/or from the outside appearance of the equipment, contact the shipping company or your
dealer immediately. The damage statement must be made within 6 days from receipt of the product and
must be notified to the shipping carrier directly. Should the product need to be returned to the
manufacturer, please use the original package.
Danger to persons due to transport damages
Mechanical damage to the electrical components constitutes a serious danger to persons
and property. In case of doubt regarding the non-integrity of the package or of the product
contained therein, contact the manufacturer before carrying out the installation and/or the
start-up.
3.1.1 Storage
The package normally ensures protection from humidity and possible damages during transport. Do not
store the UPS outdoor.
Risk of damage due to inappropriate storage
 For the environmental storage conditions, refer to the indications given for the
installation of the device.
 The device must only be stored in rooms protected from dust and humidity.
 The device cannot be stored outdoor.
OMW07096 REV. E 23