A40-D Detachment - MacDon A30-S Operator's Manual

Pull-type mower conditioners, self-propelled auger headers
Table of Contents

Advertisement

6.7.2 A40-D Detachment

CAUTION
To
prevent
accidental
windrower, place all controls in NEUTRAL or
in PARK, engage park brake (if applicable),
shut off engine, and remove key.
a. Move LH cab-forward platform to rear of
windrower.
M150 WITHOUT REVERSER VALVE
M155, M200 SIMILAR
A
M150 WITH REVERSER VALVE
M155, M200 SIMILAR
M100, M105
Form 169000 / 169040
SECTION 6 OPERATION
movement
B
A
B
C
b. Disconnect the two hydraulic hoses (A) and (B)
or (C) and (D) from windrower valve(s).
G
of
c. Raise lever (E), and undo Velcro straps (F).
d. Move hose bundle (G) to store on header
walkway.
e. Install caps on connectors and hose ends (if
equipped).
D
f.
At the header, disconnect electrical connector by
turning collar counter clockwise, and pulling
connector to disengage.
g. Disconnect hoses from hydraulic motor, and
auger and reel pressure hose.
49
E
F
STANDARD HEADER
GRASS SEED HEADER
(continued next page)
Revision D

Advertisement

Table of Contents
loading

This manual is also suitable for:

A30-dA40-d

Table of Contents