Feed Pan / Rock-Drop Tine Position - MacDon A30-S Operator's Manual

6.17.10 Feed Pan / Rock-Drop Tine Position

The rear of the feed pan is adjustable "up" and
"down" to raise or lower the feed pan and rock
drop tines.
 Lowering the feed-pan helps prevent
plugging in heavy crop.
 Raising the feed-pan helps to form an
even windrow in light crop.
WARNING
To avoid bodily injury or death from
unexpected start-up
machine; stop engine, remove key and
engage header lift cylinder stops before
going under machine.
a. Raise header fully, and engage header lift
cylinder stops.
b. Stop engine, and remove key.
B
C
c. Loosen nut (A) both sides, and align pointer (B)
at each side of rock drop tine support with one of
the slots (C) to match crop condition.
CROP
LIGHT
CONDITION
Upper
SLOT
d. Tighten hardware on both sides.
e. Disengage header lift cylinder stops.
Form 169000 / 169040
SECTION 6 OPERATION
or fall of raised
A
NORMAL HEAVY
Center Lower
85
Revision D