For Machines Held From The Rear Side - Avery Dennison ALS 204 Installation Manual

3 I
NSTALLATION AND DEINSTALLATION
2.1 U
NPACKING

For machines held from the rear side

– Order number for fixing bolt assembly [4A] (includ-
ing screw and cylinder pins): A7621
Tools:
– 17 mm hexagon socket driver
– 8 and 10 mm hexagon socket drivers
Locate the two cylinder pins [4B] in the holes in the

fixing bolt [4A].
Screw the fixing bolt [5B] onto the flange on the rear

side of the machine with the screw provided [5C].
– The two cylinder pins must locate into the holes
in the flange.
– Mount the fixing bolt with its bevelled side pointing
inwards towards the machine.
Tightening torque:350 Nm
,
ASSEMBLING AND CONNECTING THE MACHINE
[5A]
A
[4] Fixing bolt (A) for clamping the machine from the rear side.
The cylinder pins (B) prevent rotation of the fixing bolt.
A
C
[5] Mounting the fixing bolt (B).
15
ALS
20X
256
B
B