Installation - Rear Cover - Avery Dennison snap 700 Operator's And Service Manual

114
11.6.3 Installation – Rear Cover
Classification: Avery Dennison - Public
1) Insert the Template supplied into the cover hole below and closest to the
above Verifier Bracket Assembly. Bending the Template slightly to match
the Cover contour will assure a more accurate location.
2) Scribe a line around the inner cutout of the Template.
3) Remove the Template and with a small saw or Dremel Tool, remove the
material within the scribed line.
assure a clearance around the Verifier Bracket.
User's Manual—SNAP™ 700 Printer
Slide the Cover onto the Printer to