Holding Machine In Place By Side Plate Or Base Plate - Avery Dennison ALS 204 Installation Manual

3 I
NSTALLATION AND DEINSTALLATION
2.1 U
NPACKING
Holding machine in place by side plate or
base plate
– Order number for flange plate assembly [10C] (in-
cluding screws and washers): A7622
Tool:
– 8 mm hexagon socket driver
Screw the flange plate [10C] to the side or base of

the machine.
– Use the four screws provided in delivery (ISO 4762
(DIN 912) M10x25).
Lift the machine and slide the clamp over the end of

the tubing of the support. Tighten the set-screw
[10A].
Tightening torque:
– set-screw [10A] . . . . . . . . . . . . . . . . . 45 Nm
Blind hole depth: 13 mm
,
ASSEMBLING AND CONNECTING THE MACHINE
A
[10] Attachment points
17
ALS
20X
256
B
C