Setting Colors And Units - Datex-Ohmeda Avance User's Reference Manual

Setting colors and
Setting colors
M1145956
Set the units of the parameters through the Colors and Units menu.
units
Access the Colors menu through Colors and Units menu.
Colors and Units
Patient Weight kg
Gas Supply Pressure kPa
Previous Menu
To set the units:
1. From Install/Service - Page 2, select Colors and Units.
2. Select the item to change. Make the change.
3. Select Previous Menu to return to Install/Service - Page 2.
Set the colors of the parameter waveform information, digit fields, and
trends through the Colors menu.
Previous Menu
To set the colors:
1. From Install/Service - Page 2, select Colors and Units -
Colors.
2. Select the item to change. Make the change.
3. Select Previous Menu to return to the Colors and Units menu.
4. Continue selecting Previous Menu to return to the desired menu.
Colors
kg, lb
CO2 % %, kPa, mmHg
psi, kPa, bar
Paw cmH2O kPa, hPa, cmH2O, mmHg, mbar
Colors
Paw Yellow Yellow, White, Green, Red, Blue
Flow Green Yellow, White, Green, Red, Blue
Resp White Yellow, White, Green, Red, Blue
CO2 White Yellow, White, Green, Red, Blue
12 Super User Mode
12-9